- |
-
- |
Zanussi Oven Error Codes
- Home /
- News & Advice /
- Zanussi Oven Error Codes
- November 4th, 2020
- No Comments
- Posted in fault codes
Has your Zanussi oven stopped working or has started to display error codes? If the answer is yes and you are not sure what the error code means, please take a look at the list we have provided with all the information you need to decode the fault code system so that you can make changes or repairs yourself to get your machine up and running again.
| Error Code | Fault Description |
|---|---|
| F0 | No alarm audible signal. Replace the electronic board |
| F1 | Door not locking. Check door lock mechanism |
| F2 | Door not unlocking. Check the door lock mechanism and the control thermostat |
| F3 | Self check error. Disconnect mains and reconnect after 5 minutes |
| F4 | Temperature sensor, o/c or s/c. Replace as necessary |
| F5 | Relay contacts sticking. Replace electronic board |
| F6 | The power board temperature too high. Check fan and duct position for correct airflow |
| F7 | Incorrect mains polarity. Check, reconnect and test |
| F8 | Power to interface connection. Replace electronic board |
| F9 | Microprocessor auto-resetting. Disconnect mains and reconnect after 5 minutes |
If you are continuing to have issues with your Oven, then please be sure to contact Glotech Repairs to organise an appointment with our qualified engineers. Some repairs need to be carried out by a trained professional, so if you are about to attempt a repair yourself, please be extremely careful and only do so if you are qualified.
Leave a Reply